Home - Return to Previous Page
Additional Images

Polar FIS Advanced Dashboard Display

PolarFIS
Pricing: $275.00

Qty:
Free Ground or Postal Service Shipping to the Continental U.S.

Description

The Polar-FIS is a plug and play device that delivers detailed vehicle parameters to the MFA/FIS screen on your dashboard of your VW/Audi Gas or Diesel. This innovation plugs inline to the Body Control Module to offer detailed diagnostics from the CAN-BUS. No need for countless gauges on your dash, A-pillar, vents or center console anymore. The Polar-FIS delivers real time information so you can access the data when you want it. Over 40 parameters are accessible with the ability to spread specific parameters over 5 screens.

Real time data is crucial when things start to go bad in your vehicle not to mention the buffers the factory builds into the algorithms like the difference in speed displayed on the speedo vs actual speed. The Polar-FIS pulls the true data prior to entering the algorithm and give you the real-time information.

This is the new 2016 Edition that has plastic black case and KESSY Range Extended for vehicles with keyless entry and engine start.

Warning: Does not fit (2011-2014 S, SE, SEL and TDI) Jetta Sedans

Here is a <LINK> to FAQ for the Polar FIS Unit

PolarFIS Advance Parameters:

  • - Real speed (read from ECU)
  • - Oil temperature (°C / °F)
  • - Coolant temperature (°C / °F)
  • - Outdoor temperature (°C / °F)
  • - Admision temperature (°C / °F)
  • - Turbo boost pressure (bar/ PSI)
  • - Exhaust Gas Temperature (EGT)
  • - RPM motor
  • - Voltage of the battery.
  • - Fuel remaining (Litres / Gallons)
  • - Atmospheric pressure
  • - Pressure fuel pump
  • - Motor load.
  • - Ambient Temperature (engine ECU)
  • - Coolant temperature engine output.
  • - Coolant temperature leaving the radiator.
  • - Mass air flow
  • - Admision pressure
  • - Sensor 1 throttle pedal
  • - Sensor 2 throttle pedal
  • - Sensor 1 throttle valve
  • - Sensor 2 throttle valve
  • - Horse power used (CV)
  • - Oil level
  • - Minimum oil level
  • - Brake master cylinder pressure
  • - Pressure in the fuel rail
  • - Torque used NM
  • - Injection timing
  • - Injection quantity
  • - Injection angle
  • - Injection start
  • - TV Free function

Other Features include:
- Built in VIM to enable video on stereo screen while vehicle is in motion.
- POLAR Advanced FIS supports OEM bluetooth and Fiscon bluetooth, unlike other products, POLAR Advanced FIS does not use the Bluetooth menu in the FIS, but creates a new menu called Advanced POLAR FIS.
- The name of the created menu is customisable, which can substitute the name POLAR Advanced FIS by the text you want (up to 10 characters)
- Option to turn off the POLAR Advanced FIS screen off making the unit undetectable when taking the car in for service or repair. Is reactivated by simply pressing the OK button on the steering wheel or windshield wiper lever for 10 seconds.
- Automatic temperature units (° C, ° F), Speed (kmh / mph) and Size (Litres / Gallons) selected in the FIS.
- Manual selection of the units in which you want to display the parameters relating to pressure. Automatic, mbar, bar, PSI.
- Multi-function steering wheel / Wiper stalk control.

Sometimes not all the perimeters are supported please request a list from kerma for your car.

- Polar Advanced FIS automatically installs itself in the gateway, so you do not need diagnostic software after installation.

Quick Start Guide after install:

1. scroll to phone screen on your steering wheel

2. Hold OK on phone screen

3. Press ok on Visualization

4. Press ok on Parameters

5. Press ok on Screen 1

6. Press ok on Parameters and start choosing the one you want for screen 1 up to 4 parameters per screen and continues to screen 2 and so forth.

INSTALL VIDEO

How do I know my car is compatible?

Locate the 2-character code that is between parenthesis in our list of compatible vehicles, for example 8P for the "Audi A3 (8P)", and check the characters on the 7 and 8 positions of your vehicle's VIN (Vehicle Identification Number).

If you find the same 8P code in these positions then it is compatible: WAUZZZ8P77A021568

This same example is applicable for Seat, Audi, Volkswagen and Skoda which are the supported brands by the product.

 

Possible available parameters and values

001. Vehicle real speed - Select in the car: "Km/h"
002. External temperature - Select in the car: "Out. °C"
003. Engine RPMs - Select in the car: "RPM"
004. Battery voltage (Volts) - Select in the car: "Batt. V."
005. Current fill volume in the fuel tank - Select in the car: "Fuel Lit."
006. Calculated engine oil temperature - Select in the car: "!Oil °C"
007. Measured engine oil temperature - Select in the car: "Oil °C"
008. Ambient temperature in the engine compartment - Select in the car: "Amb. °C"
009. Intake air temperature - Select in the car: "Intake °C"
010. Engine coolant temperature - Select in the car: "Coolant °C"
011. Coolant temperature at the engine outlet - Select in the car: "Motor °C"
012. Coolant temperature at the radiator outlet - Select in the car: "Radiat. °C"
013. Fuel temperature - Select in the car: "Fuel °C"
014. Request boost presure - Select in the car: "!Boost mb"
015. Measured boost pressure - Select in the car: "Boost mb"
016. Atmospheric pressure - Select in the car: "Atm. mb"
017. Intake manifold absolute pressure - Select in the car: "Intake mb"
018. Required fuel pump pressure - Select in the car: "!Fuel bar"
019. Measured fuel pump pressure - Select in the car: "Fuel bar"
020. Common Rail fuel pressure - Select in the car: "F. rail bar"
021. Brake pedal pressure - Select in the car: "Brake bar"
022. Servo brake pump pressure - Select in the car: "Brake b. bar"
023. Calculated engine load - Select in the car: "!Load %"
024. Measured engine load - Select in the car: "Load %"
025. Mass air flow in bank 1 (MAF sensor) - Select in the car: "M.A.F. 1"
026. Mass air flow in bank 2 (MAF sensor) - Select in the car: "M.A.F. 2"
027. Throttle pedal position in sensor 1 (potentiometer 1) - Select in the car: "Pedal 1"
028. Throttle pedal position in sensor 2 (potentiometer 2) - Select in the car: "Pedal 2"
029. Throttle valve position in sensor 1 - Select in the car: "Valve 1"
030. Throttle valve position in sensor 2 - Select in the car: "Valve 2"
031. Delivered engine torque (Nm) - Select in the car: "Torq. nm"
032. Delivered engine power (HP) - Select in the car: "Power CV"
033. Level at which the oil is in millimeters above the alarm level - Select in the car: "Oil level"
034. Minimum level reached by oil in millimeters above the alarm level - Select in the car: "M. oil lev."
035. Injection timing synchronization - Select in the car: "Inj. tim."
036. Ignition angle - Select in the car: "A. °BTDC"
037. Sum of misfires accumulated on all cylinders - Select in the car: "Mis."
038. Number of misfires in the cylinder 1 - Select in the car: "Mis. 1"
039. Number of misfires in the cylinder 2 - Select in the car: "Mis. 2"
040. Number of misfires in the cylinder 3 - Select in the car: "Mis. 3"
041. Number of misfires in the cylinder 4 - Select in the car: "Mis. 4"
042. Number of misfires in the cylinder 5 - Select in the car: "Mis. 5"
043. Number of misfires in the cylinder 6 - Select in the car: "Mis. 6"
044. Number of misfires in the cylinder 7 - Select in the car: "Mis. 7"
045. Number of misfires in the cylinder 8 - Select in the car: "Mis. 8"
046. Number of misfires in the cylinder 9 - Select in the car: "Mis. 9"
047. Number of misfires in the cylinder 10 - Select in the car: "Mis. 10"
048. Number of misfires in the cylinder 11 - Select in the car: "Mis. 11"
049. Number of misfires in the cylinder 12 - Select in the car: "Mis. 12"
050. Number of misfires x1000 in the cylinder 1 - Select in the car: "Mis. x1"
051. Number of misfires x1000 in the cylinder 2 - Select in the car: "Mis. x2"
052. Number of misfires x1000 in the cylinder 3 - Select in the car: "Mis. x3"
053. Number of misfires x1000 in the cylinder 4 - Select in the car: "Mis. x4"
054. Number of misfires x1000 in the cylinder 5 - Select in the car: "Mis. x5"
055. Number of misfires x1000 in the cylinder 6 - Select in the car: "Mis. x6"
056. Number of misfires x1000 in the cylinder 7 - Select in the car: "Mis. x7"
057. Number of misfires x1000 in the cylinder 8 - Select in the car: "Mis. x8"
058. Number of misfires x1000 in the cylinder 9 - Select in the car: "Mis. x9"
059. Number of misfires x1000 in the cylinder 10 - Select in the car: "Mis. x10"
060. Number of misfires x1000 in the cylinder 11 - Select in the car: "Mis. x11"
061. Number of misfires x1000 in the cylinder 12 - Select in the car: "Mis. x12"
062. Angle delay in the cylinder 1 - Select in the car: "D. 1 °KW"
063. Angle delay in the cylinder 2 - Select in the car: "D. 2 °KW"
064. Angle delay in the cylinder 3 - Select in the car: "D. 3 °KW"
065. Angle delay in the cylinder 4 - Select in the car: "D. 4 °KW"
066. Angle delay in the cylinder 5 - Select in the car: "D. 5 °KW"
067. Angle delay in the cylinder 6 - Select in the car: "D. 6 °KW"
068. Angle delay in the cylinder 7 - Select in the car: "D. 7 °KW"
069. Angle delay in the cylinder 8 - Select in the car: "D. 8 °KW"
070. Angle delay in the cylinder 9 - Select in the car: "D. 9 °KW"
071. Angle delay in the cylinder 10 - Select in the car: "D. 10 °KW"
072. Angle delay in the cylinder 11 - Select in the car: "D. 11 °KW"
073. Angle delay in the cylinder 12 - Select in the car: "D. 12 °KW"
074. Exhaust gases temperature in bank 1 - Select in the car: "Exh. 1 °C"
075. Exhaust gases temperature in bank 2 - Select in the car: "Exh.2 °C"
076. Exhaust gases temperature at the catalyst inlet - Select in the car: "Catal. °C"
077. Air / Fuel ratio (Lambda factor) in bank 1 - Select in the car: "Lambda 1"
078. Air / Fuel ratio (Lambda factor) in bank 2 - Select in the car: "Lambda 2"
079. Fuel trim in bank 1/3 - Select in the car: "LTFT1-3"
080. Fuel trim in bank 2/4 - Select in the car: "LTFT2-4"
081. Specified duty cycle of the N75 valve - Select in the car: "!N75 %"
082. Measured duty cycle of the N75 valve - Select in the car: "N75 %"
083. Injection quantity - Select in the car: "Inj. m/str"
084. Injection start - Select in the car: "St. °BTDC"
085. Injection duration - Select in the car: "Dur. °KW"
086. Injection start quantity - Select in the car: "St. q. nm"
087. Injection quantity in the cylinder 1 - Select in the car: "D.1 m/str"
088. Injection quantity in the cylinder 2 - Select in the car: "D.2 m/str"
089. Injection quantity in the cylinder 3 - Select in the car: "D.3 m/str"
090. Injection quantity in the cylinder 4 - Select in the car: "D.4 m/str"
091. Injection quantity in the cylinder 5 - Select in the car: "D.5 m/str"
092. Injection quantity in the cylinder 6 - Select in the car: "D.6 m/str"
093. Injection quantity in the cylinder 7 - Select in the car: "D.7 m/str"
094. Injection quantity in the cylinder 8 - Select in the car: "D.8 m/str"
095. Injection quantity in the cylinder 9 - Select in the car: "D.9 m/str"
096. Injection quantity in the cylinder 10 - Select in the car: "D.10 m/str"
097. Injection quantity in the cylinder 11 - Select in the car: "D.11 m/str"
098. Injection quantity in the cylinder 12 - Select in the car: "D.12 m/str"
099. EGR valve duty cycle in bank 1 - Select in the car: "EGR1m/str"
100. EGR valve duty cycle in bank 2 - Select in the car: "EGR2m/str"
101. Requested charge pressure control - Select in the car: "!Control %"
102. Measured charge pressure control - Select in the car: "Control %"
103. Exhaust gases temperature before turbo - Select in the car: "EGT °C"
104. Diesel particles filter (DPF) temperature in bank 1 - Select in the car: "DPF1 °C"
105. Diesel particles filter (DPF) temperature in bank 2 - Select in the car: "DPF2 °C"
106. Diesel particles filter (DPF) oil ash volume in bank 1 - Select in the car: "DPF1 L."
107. Diesel particles filter (DPF) oil ash volume in bank 2 - Select in the car: "DPF2 L."
108. Diesel particles filter (DPF) percentage filling level - Select in the car: "DPF %"
109. Diesel particles filter (DPF) regenerations counter - Select in the car: "Regen."
110. Temperature at the Diesel particles filter (DPF) inlet - Select in the car: "DPF in °C"
111. Temperature at the Diesel particles filter (DPF) outlet - Select in the car: "DPF out °C"
112. Vehicle lateral G-force - Select in the car: "Side G"
113. Distance traveled since the last Diesel particles filter (DPF) regeneration - Select in the car: "DPF Km."
114. Ad-Blue tank percentage filling level - Select in the car: "AdB tank"
115. Ad-Blue grams used - Select in the car: "AdB used"
116. Requested pressure in the fuel Common Rail - Select in the car: "!F. rail bar"
117. Requested injection duration - Select in the car: "!Dur. °KW"
118. Requested injection start - Select in the car: "!St. °BTDC"
119. Calculated Lambda factor - Select in the car: "!Lambda"
120. Diesel particles filter (DPF) calculated filling level - Select in the car: "!DPF g."
121. Diesel particles filter (DPF) regeneration status - Select in the car: "DPF st."
122. Diesel particles filter (DPF) differential pressure - Select in the car: "DPF mb"
123. Measured soot mass 1 of the Diesel particles filter (DPF) - Select in the car: "Soot m 1 gr."
124. Measured soot mass 2 of the Diesel particles filter (DPF) - Select in the car: "Soot m 2 gr."
125. Calculated soot mass 1 of the Diesel particles filter (DPF) - Select in the car: "!Soot m 1 gr."
126. Calculated soot mass 2 of the Diesel particles filter (DPF) - Select in the car: "!Soot m 2 gr."
127. Lambda adaptation (%) while idle in bank 1 - Select in the car: "Lambda I 1"
128. Lambda adaptation (%) while idle in bank 2 - Select in the car: "Lambda I 2"
129. Lambda adaptation (%) while driving in bank 1 - Select in the car: "Lambda P 1"
130. Lambda adaptation (%) while driving in bank 2 - Select in the car: "Lambda P 2"
131. Exhaust gases temperature in sensor 1 - Select in the car: "EGT S1 °C"
132. Exhaust gases temperature in sensor 2 - Select in the car: "EGT S2 °C"
133. Exhaust gases temperature in sensor 3 - Select in the car: "EGT S3 °C"
134. Exhaust gases temperature in sensor 4 - Select in the car: "EGT S4 °C"
135. Requested Torque by the ASR - Select in the car: "!Torq. nm"
136. Torque reduction requested by the automatic DSG transmission - Select in the car: "DSG nm"
137. Indication of the actual torque limit - Select in the car: "T. red."
138. Diesel particles filter (DPF) requested regenerations - Select in the car: "Req. regen"
139. Electric generator load in % - Select in the car: "Gen. load"
140. Alternator power in watts - Select in the car: "Alt. power W"
141. Rear fuel pump pressure - Select in the car: "Fuel mb"
142. Rear fuel pump duty cycle - Select in the car: "Fuel DC"
143. Air conditioner (HVAC) compressor torque - Select in the car: "HVAC nm"
144. Air conditioner (HVAC) compressor pressure - Select in the car: "HVAC bar"
145. Vehicle longitudinal lateral G-force - Select in the car: "Long. G"

 

Extra features and capabilities

- Ability to setup the number of blinks of convenience signal lights (up to 10 blinks).
- Automatic passenger mirror auto tilt option after engage reverse gear as a parking aid .
- Activation of secret vehicle functions that until now only were possible with a diagnosis cable and special software.
- TV-Free in Motion function to play videos or TV in the navigation with the vehicle in motion for the enjoyment of passengers.
- Customizable steering wheel keys and windshield wiper lever.
- Modification of the sensitivity of the rain sensor.
- Modification of the sensitivity of the light sensor.
- Enable / Disable American DLR.
- Enabling / Disabling daytime running lights.
- Enabling / Disabling cornering/gyre aid lights (using fog lights).
- Enabling / Disabling second rear fog light (when bulb is installed).
- Enable / disable automatic doors lock from 15 km/h.
- Enable / disable automatic closing by rain.
- Enabling / Disabling one touch closing windows.
- Enable / Disable hazard warning in case of sudden braking.
- ...

NOTE: In these diagnosis functions, Polar Advanced FIS performs the tasks of coding the ECU with the requested function transparently for you, so if this function is not supported by your vehicle ECU, then it cannot be activated.

Reviews / Q&A

Reviews and Q&A

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 0.4 lbs.
  • W2.0000” x H2.0000” x L2.0000”
  • Free Ground or Postal Service Shipping to the Continental U.S.