|
--PERFORMANCE PARTS-
|
GAUGES and PODS
|
|
A4 Dual Column Pod - New South Performance Boost / EGT Indiglo Blue
Mk4 Dual DieselPod - Mk4 ColumnPod, Indigo 0-35 PSI, 9 ft nylon tubing kit, NoBuzz TDI intercooler connector, electrical wiring and connectors. 2200 degree F EGT gauge comes with sender and matching LED
Price: $275.00
|
|
|
A5 DashPod Indigo Bundle
Mk5 DashPod
Mounting in the center vent assembly on the dash, the Mk5 DashPod™ is designed to hold three (3) 2” or 2 1/16” (52mm) gauges.
Matched in color and gloss with the center vent assembly, the Mk5 ColumnPod™ looks like an OEM installation.
The unique, patent-pending design works with both Climatronic and non-Climatronic systems, snaps into place, is easily removable, and its low profile gives a clean, sleek look.
Price: $409.00
|
|
|
A5 Dual Column Pod - Boost / EGT Indiglo Blue
Mk5 Dual DieselPod - Mk5 ColumnPod, Indigo 30 In.Hg - 25 PSI, 9 ft nylon tubing kit, NoBuzz TDI intercooler connector, electrical wiring and connectors. 2200 degree F EGT gauge comes with sender and matching LED
Price: $270.00
|
|
|
B5 Passat ColumnPod with or without Indigo Boost Gauge
  
Passat ColumnPods
Easily keep an eye on your engine with a gauge mounted in a ColumnPod™.
The ColumnPod™ allows you to simply and quickly add a 2",2 1/16", or 52mm gauge to the steering column of your B5 (1998.5-2005) Passat.
Also available for the B6 Passat. See B6 Columnpod
Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road. |
| | |  |  |
Add a "1" above to add Indigo 30 In.Hg - 30 PSI Boost Gauge,6 ft nylon tubing kit , NoBuzz T-connector, electrical wiring and connectors for an additional $70. To order just the gauge indicate a "1" next to "Just Gauge" option above for just the gauge and installation hardware ($70 total).
Price: $35.00
|
|
|
Boost/EGT 30 PSI and EGT 9' Complete Kit
Boost/EGT Combo gauge kit. This complete kit includes all cables and sensors. This laboratory quality instrument will measure your boost pressure with an external pressure sensor and exhaust gas temperature with a 2" type K thermocouple. The temperature range in the digital window goes from 0 to 1023 deg C. Includes wire harness, pressure sensor, thermocouple and compression fitting. Has 9 ft tc cable for right hand drive vehicles. MI1020-2
Price: $254.00
|
|
|
EGT Gauge - New South Performance Indigo EGT
Indigo 2200°F Pyrometer (EGT) GaugeIncludes gauge, probe, fittings, connectors
Price: $160.00
|
|
|
Indigo 0-30 in hg, 0-25 PSI Boost Gauge
Indigo 0-30 in hg, 0-25 PSI Boost GaugeIncludes gauge, nylon tubing, connectors, zipties
Price: $70.00
|
|
|
Indigo 100 PSI Oil Pressure Gauge
Indigo 100 PSI Oil Pressure GaugeIncludes gauge, sender, wiring, connectors, zipties
Price: $109.00
|
|
|
Indigo Offset DashPod for 2.0 FSI Complete Kit
Mk5 DashPod with color-matched Indigo gauges. Gauges come with appropriate connectors, senders, tubing, and fittings for 2.0FS, indigo 30 in. hg- 30 psi boost gauge w/nobuzz fitting, indigo 100 psi oil pressure gauge w/banjo port, indigo 2200degrees F EGT gauge.
Mk5 DashPods Mounting in the center vent assembly on the dash, the Mk5 DashPod™ is designed to hold three (3) 2” or 2 1/16” (52mm) gauges. Matched in color and gloss with the center vent assembly, the Mk5 ColumnPod™ looks like an OEM installation. The unique, patent-pending design works with both Climatronic and non-Climatronic systems, snaps into place, is easily removable, and its low profile gives a clean, sleek look. Download Mk5 Boost Gauge Installation Manual | 
|
Price: $442.00
|
|
|
Mcnally Boost / EGT Gauge Combo Kit
This gauge shows 0-30 PSI on the needle and Deg F or C on the digital display. Kit contains gauge, cables, short thermocouple and pressure sensor.
Price: $250.00
|
|
|
McNally IAT Deg F EMP PSI combo gauge -39 Complete Kit
The McNally intake air temp and exhaust manifold pressure gauge is great for fine tuning high performance/ custom turbo and inter cooler upgrades.Order Includes Automotive 75 PSIG sensor used with all boost pressure gauges, pinned cable. IAT Deg F EMP PSI combo gauge -39. One 2" type K thermocouple and pinned cable, used with all gauges that read temperature. Thermocouple compression fitting that adapts into tapped hole in adapter plate or manifold. 1/8" NPT thread. Accepts .125" diasmeter thermocouples. MI1001-39, MI1005-1, MI1006-1, MI1008-1, MI1004-
Price: $312.00
|
|
|
McNally TDI Oil Press/Temp combo gauge 80 PSI Deg F -16 Complete Kit
This gauge is great for showing Oil Pressure in PSI and Oil Temperature in degrees F. The kit includes the oil pressure and oil temp gauge, the external pressure sensor and cable, external thermocouple, and comp fitting. The TDI VW owners with the ALH engine can also add the Oil Press/Temp adapter manifold that holds the pressure and temperature sensors. MI1001-16, MI1008-1, MI1005-1, MI1004-3
Price: $242.00
|
|
|
McNally TDI Oil Pressure Gauge
KermaTDI is now a distributor for Mcnally Gauges. We have a full line of gauges to choose from.
Price: $155.00
|
|
|
Mcnally TDI Oil Pressure/Temp Combo Gauge
This gauge shows 0-80 PSI on the needle and Deg F or C on the digital display (You specify). Kit contains gauge, cables, thermocouple and pressure sensor.
Price: $155.00
|
|
|
Mcnally Voltage / Water Temp Combo kit
This gauge shows 10-16 Volts DC on the dial scale and Deg F on the digital scale.
Price: $202.00
|
|
|
McNally Voltage/Water Temp Combo Gauge
KermaTDI is now a distributor for Mcnally Gauges. We have a full line of gauges to choose from.
Price: $155.00
|
|
|
Mk3 ColumnPod (Adjustable Steering Column or Non-Adjustable)
The VW Mk3 ColumnPod™ lets you put a 2" or 52mm gauge on the steering column of your 1993-1998 Golf or Jetta. Available for Ajustable Steering and Non-Adjustable Steering Column.Gauge addition available
Price: $35.00
|
|
|
MK4 42 Draft Designs Lower Pod Beige Fabric
mk4 Lower A-Pillar Gauge Pod Beige Fabric
Add the Upper Pod to this Lower Pod for the Dual Pod setup.
Price: $75.00
|
|
|
Mk4 42 Draft Designs Lower Pod Black Fabric
mk4 Lower A-Pillar Gauge Pod Black Fabric
Add the Upper Pod to this Lower Pod for the Dual Pod setup.
Price: $75.00
|
|
|
Mk4 42 Draft Designs Lower Pod Gray Fabric
mk4 Lower A-Pillar Gauge Pod Gray Fabric
Add the Upper Pod to this Lower Pod for the Dual Pod setup.
Price: $75.00
|
|
|
Mk4 42 Draft Designs Upper Pod Beige Fabric
mk4 Upper A-Pillar Gauge Pod Beige Fabric
Price: $75.00
|
|
|
Mk4 42 Draft Designs Upper Pod Black Fabric
mk4 Upper A-Pillar Gauge Pod Black Fabric
Add this Upper Pod to the Lower Pod for the Dual Pod setup.
Price: $75.00
|
|
|
Mk4 42 Draft Designs Upper Pod Gray Fabric
mk4 Upper A-Pillar Gauge Pod Gray Fabric
Add this Upper Pod to the Lower Pod for the Dual Pod setup.
Price: $75.00
|
|
|
Mk4 Golf Air Vent Pod
Mk4 Golf vent gauge pod for most Mk4 Golfs. Note: Picture for left-hand drive (U.S) etc..
Price: $175.00
|
|
|
Mk5 Diesel VentPod
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
| 
|
Price: $130.00
|
|
|
Mk5 Turbo VentPod?
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
| 
Mk5 Turbo VentPod™
Mk5 VentPod™, Indigo 30 In.Hg - 30 PSI or VDO Vision Boost Gauge - 30 In.Hg - 25 PSI, 6 ft nylon tubing kit, NoBuzz T-connector, Blue or Red LED, electrical wiring and connectors
|
Price: $135.00
|
|
|
Mk5 VentPods
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
| 
|
Price: $55.00
|
|
|
MK6 Column Pod (Boost Gauge and TSI Fitting)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
Price: $125.00
|
|
|
|
MK6 Column Pod (no gauge)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want. The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view. Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
| |
Price: $35.00
|
|
|
|
MK6 Column Pod (with spectrum boost gauge and MultiTap hose)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
Price: $165.00
|
|
|
|
MK6 Column Pod (with spectrum boost gauge ONLY)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
Price: $115.00
|
|
|
MK6 Dual Column Pod ( with spectrum boost gauge ONLY)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $120.00
|
|
|
|
MK6 Dual Column Pod (Boost Gauge and TSI Fitting)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $130.00
|
|
|
|
MK6 Dual Column Pod (with spectrum boost gauge and MultiTap hose)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $170.00
|
|
|
MK6 Vent Pod (no gauge)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $55.00
|
|
|
|
MK6 Vent Pod (with spectrum boost gauge and MultiTap hose)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $185.00
|
|
|
|
MK6 Vent Pod (with spectrum boost gauge ONLY)
Mk6 Pods
With the widest variety of gauge pods for the VW Mk6, we give you the options that you want.
The single and dual ColumnPod mount on top of the steering column, and hold a 2” or 2 1/16” (52mm) gauge on your GTI, GLI, Golf, Jetta.
Our exclusive ColumnPod design hides all wires and tubes from view.
Specifically designed for the driver’s side vent of the VW Mk6 chassis for the GTI and Golf, the NewSouth Performance Mk6 VentPod is:
- CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- Matches the texture and color of the existing vent slats
-
Price: $135.00
|
|
|
New South Performance 0-35PSI Boost Gauge
Indigo 0-35 in hg, PSI Boost Gauge Includes gauge, nylon tubing, connectors, zipties
Price: $75.00
|
|
--PERFORMANCE PARTS-
|
GAUGES and PODS
|
Combos
|
|
|
A4 Dual Column Pod - New South Performance Boost / EGT Indiglo Blue
Mk4 Dual DieselPod - Mk4 ColumnPod, Indigo 0-35 PSI, 9 ft nylon tubing kit, NoBuzz TDI intercooler connector, electrical wiring and connectors. 2200 degree F EGT gauge comes with sender and matching LED
Price: $275.00
|
|
|
|
A5 DashPod Indigo Bundle
Mk5 DashPod
Mounting in the center vent assembly on the dash, the Mk5 DashPod™ is designed to hold three (3) 2” or 2 1/16” (52mm) gauges.
Matched in color and gloss with the center vent assembly, the Mk5 ColumnPod™ looks like an OEM installation.
The unique, patent-pending design works with both Climatronic and non-Climatronic systems, snaps into place, is easily removable, and its low profile gives a clean, sleek look.
Price: $409.00
|
|
|
|
A5 Dual Column Pod - Boost / EGT Indiglo Blue
Mk5 Dual DieselPod - Mk5 ColumnPod, Indigo 30 In.Hg - 25 PSI, 9 ft nylon tubing kit, NoBuzz TDI intercooler connector, electrical wiring and connectors. 2200 degree F EGT gauge comes with sender and matching LED
Price: $270.00
|
|
|
|
B5 Passat ColumnPod with or without Indigo Boost Gauge
Passat ColumnPods
Easily keep an eye on your engine with a gauge mounted in a ColumnPod™.
The ColumnPod™ allows you to simply and quickly add a 2",2 1/16", or 52mm gauge to the steering column of your B5 (1998.5-2005) Passat.
Also available for the B6 Passat. See B6 Columnpod
Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road. |
| | | | |
Add a "1" above to add Indigo 30 In.Hg - 30 PSI Boost Gauge,6 ft nylon tubing kit , NoBuzz T-connector, electrical wiring and connectors for an additional $70. To order just the gauge indicate a "1" next to "Just Gauge" option above for just the gauge and installation hardware ($70 total).
Price: $35.00
|
|
|
B6 Passat ColumnPod with or without Indigo Gauge Complete Kit
Add Indigo 30 In.Hg - 30 PSI Boost Gauge, 6 ft nylon tubing kit, NoBuzz T-connector, electrical wiring and connectors for an additional $80 by indicating above. Or if you just want the gauge, connectors and wiring enter a "1" in the "Just Gauge" option above for $80 total cost.
Price: $35.00
|
|
|
|
Boost/EGT 30 PSI and EGT 9' Complete Kit
Boost/EGT Combo gauge kit. This complete kit includes all cables and sensors. This laboratory quality instrument will measure your boost pressure with an external pressure sensor and exhaust gas temperature with a 2" type K thermocouple. The temperature range in the digital window goes from 0 to 1023 deg C. Includes wire harness, pressure sensor, thermocouple and compression fitting. Has 9 ft tc cable for right hand drive vehicles. MI1020-2
Price: $254.00
|
|
|
|
Indigo Offset DashPod for 2.0 FSI Complete Kit
Mk5 DashPod with color-matched Indigo gauges. Gauges come with appropriate connectors, senders, tubing, and fittings for 2.0FS, indigo 30 in. hg- 30 psi boost gauge w/nobuzz fitting, indigo 100 psi oil pressure gauge w/banjo port, indigo 2200degrees F EGT gauge.
Mk5 DashPods Mounting in the center vent assembly on the dash, the Mk5 DashPod™ is designed to hold three (3) 2” or 2 1/16” (52mm) gauges. Matched in color and gloss with the center vent assembly, the Mk5 ColumnPod™ looks like an OEM installation. The unique, patent-pending design works with both Climatronic and non-Climatronic systems, snaps into place, is easily removable, and its low profile gives a clean, sleek look. Download Mk5 Boost Gauge Installation Manual |
|
Price: $442.00
|
|
|
|
McNally IAT Deg F EMP PSI combo gauge -39 Complete Kit
The McNally intake air temp and exhaust manifold pressure gauge is great for fine tuning high performance/ custom turbo and inter cooler upgrades.Order Includes Automotive 75 PSIG sensor used with all boost pressure gauges, pinned cable. IAT Deg F EMP PSI combo gauge -39. One 2" type K thermocouple and pinned cable, used with all gauges that read temperature. Thermocouple compression fitting that adapts into tapped hole in adapter plate or manifold. 1/8" NPT thread. Accepts .125" diasmeter thermocouples. MI1001-39, MI1005-1, MI1006-1, MI1008-1, MI1004-
Price: $312.00
|
|
|
|
McNally TDI Oil Press/Temp combo gauge 80 PSI Deg F -16 Complete Kit
This gauge is great for showing Oil Pressure in PSI and Oil Temperature in degrees F. The kit includes the oil pressure and oil temp gauge, the external pressure sensor and cable, external thermocouple, and comp fitting. The TDI VW owners with the ALH engine can also add the Oil Press/Temp adapter manifold that holds the pressure and temperature sensors. MI1001-16, MI1008-1, MI1005-1, MI1004-3
Price: $242.00
|
|
|
|
Mk5 Diesel VentPod
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
|
|
Price: $130.00
|
|
|
|
Mk5 Turbo VentPod?
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
|
Mk5 Turbo VentPod™
Mk5 VentPod™, Indigo 30 In.Hg - 30 PSI or VDO Vision Boost Gauge - 30 In.Hg - 25 PSI, 6 ft nylon tubing kit, NoBuzz T-connector, Blue or Red LED, electrical wiring and connectors
|
Price: $135.00
|
|
|
|
Mk5 VentPods
Mk5 VentPods Specifically designed for the driver’s side vent of the VW Mk5 chassis for GTI, Rabbit and Jetta, the NewSouth Performance VentPod is: - CAD-designed to fit virtually any 2 1/8” (52mm) gauge on the market
- Ergonomically optimized for maximum visibility to the driver and simultaneous viewing of the VentPod and the tachometer
- A simple snap-in fit that replaces the existing vent slats for easy installation
- A NoBracket™ mounting system eliminates any external mounting hardware for a clean look and better air flow through the vent
- Keeps the full function of the ventilation cut-off flap
- VentPod matches the texture and color of the existing vent slats
|
|
Price: $55.00
|
