Now includes new fluoro O ring

This device replaces the factory clip that connects the intake hose to the intake manifold on Pumpe Duse Engines. Kit consists of a plate, spacers, long bolts and can be installed in about 10 minutes.


Installation instructions:

Tools needed:

- 5mm Allen Wench (wobble end is helpful)
- 19 mm End Wrench or 10 mm Socket

Installation:

The plate is not symetrical so line up the plate on the template so they match exactly and you will discover the A and B hole. The B hole is the lower hole, towards the front of the car. Remove both bolts (possibly retainer wire). Install bolt, washer and spacer in the B hole and get it started. To do the same wirh the A hole and tighten it to about 10 NM. The threads will stick out a bit on the back side but not to worry.